PENGARUH VARIASI DIAMETER PIPA ISAP TERHADAP KARAKTERISTIK POMPA SENTRIFUGAL

  • Prayitno Ciptoadi Universitas Pattimura
DOI: https://doi.org/10.30598/ale.2.2019.83-86
Keywords: pompa sentrifugal., pipa isap, karakteristik, efisiensi

Abstract

Penelitian ini bertujuan mengetahui pengaruh variasi diameter ipa isap terhadap karakteristik pompa sentrifugal.
Penelitian dilakukan terhadap pompa sentrifugal merk SHIMIZU PS – 128 BIT dengan daya input 125 Watt.
Diameter pipa isap yang digunakan berukuran ½, ¾, dan 1 inci sedangkan diameter pipa tekan yang digunakan
berukuran ¾ inci. Pada pipa tekan ditempatkan sebuah katup cekik (throttle valve) yang diatur bukaannya untuk
mengatur kapasitas air yang dipompa sehingga karakteristik pompa sentrifugal dapat dihitung berdasarkan besaranbesaran
yang diukur. Hasil penelitian menunjukan bahwa diameter pipa isap berpengaruh terhadap karakteristik pompa
sentrifugal yang secara umum ditunjukan oleh nilai efisiensi pompa. Efisiensi poma tertinggi sebesar 0,79 dicapai
pompa dengan diameter pipa isap 1 inch diikuti berturut-turut oleh pompa dengan diameter pipa isap ¾ inci dan ½ inci
yakni 0,66 dan 0,21.

Downloads

Download data is not yet available.

References

Akimov P., ”Marine Power Plan”, Peace Publisher, Moscow.
Church A.H. dan Zulkifli Harahap, ”Pompa dan Blower Sentrifugal”, Erlangga Jakarta, 1986.
Dietzel F dan Dakso Sriyono, ”Turbin Pompa dan Kompresor”, Erlangga Jakarta, 1990.
Giles R.V., ”Fluid Mechanics and Hydraulics”, 2nd Schaum’s Outline Series, McGraw-Hill Book Company.
Khetagurov M., ”Marine Auxilliary Machinery and System”, Peace Publisher, Moscow.
Sularso, ”Pompa dan Kompresor”, Pradnya Paramita, Jakarta, 1983.
Published
2019-07-10
How to Cite
Ciptoadi, P. (2019). PENGARUH VARIASI DIAMETER PIPA ISAP TERHADAP KARAKTERISTIK POMPA SENTRIFUGAL. ALE Proceeding, 2, 83-86. https://doi.org/10.30598/ale.2.2019.83-86
Issue
Vol 2 (2019): Archipelago Engineering (ALE)
Section
Articles

An author who publishes in the ALE Proceeding agrees to the following terms:

  • Author retains the copyright and grants ALE Proceeding the right of first publication of the work simultaneously licensed under the Creative Commons Attribution-ShareAlike 4.0 License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
  • Author is able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book) with the acknowledgment of its initial publication in this journal.
  • Author is permitted and encouraged to post his/her work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of the published work (See The Effect of Open Access).

Read more about the Creative Commons Attribution-ShareAlike 4.0 Licence here: https://creativecommons.org/licenses/by-sa/4.0/.