Kewenangan Melakukan Pengawasan Pembangunan Konstruksi Speed Bump Pada Jalan
Abstract
The construction of speed bumps regulated in the Regulation of the Minister of Transportation Number 14 of 2021 concerning Amendments to the Regulation of the Minister of Transportation Number 82 of 2018 concerning Road User Control and Safety Devices, this supervisory authority is carried out to ensure that the construction of speed bumps is in accordance with the technical standards set out in the regulations. However, the construction of speed bumps is not in accordance with the regulations, making it difficult for motorized vehicle drivers to drive. For this reason, this paper examines 2 issues, namely which institution has the authority to supervise the construction of speed bumps on roads, how to supervise the construction of speed bumps on roads in Ambon City. Research method used is normative juridical, using a legislative approach, a conceptual approach, and a case approach. The law used is decision studies, journals, and internet media. The results of the study show that supervision of the construction and installation of speed bumps is the responsibility of several related institutions, depending on the location and type of road concerned. The local government, through the public works department or transportation department, has the authority to regulate and supervise the construction of speed bumps on local and regional roads. The installation of speed bumps must comply with the provisions stipulated in the Regulation of the Minister of Transportation Number 82 of 2018 concerning road user control and safety devices. Speed bumps that do not meet the provisions can be subject to criminal sanctions. Therefore, the importance of supervision from the authorized institution to supervise speed bumps is the transportation department, which must obtain permission from the local transportation department.
Downloads
References
Althariq Fasyadaffa Alifian Rushpaka, Perlindungan Hukum Terhadap Korban Kecelakaan Yang Diakibatkan Oleh Polisi Tidur (Speed Bump), 2019.
Budiono A , Damayanti N, Kurniawan A, Pengaruh Pemasangan Speed Bump Terhadap Pengurangan kecepatan kendaraan di jalan lingkungan perumahan, 2016, jurnal teknik sipil, 13(12): 125-132.
D.M. Faat, Standar Penerapan Rubber Speed Bump, Vol. 1994, No. 3, 2018.
Desy Selviany, “Gara-gara Polisi Tidur, Kecelakaan Terjadi Setiap 1 Menit di Jalan Danau Sunter Selatan”.
Gunardo, Geografi Transportasi, Yogyakarta, Ombak, 2014.
K, G, R, L Siar, C, E, M Mamahit, Pertanggung jawaban Penyelenggaran jalan atas Kerusakan jalan yang mengakibatkan Kecelakaan Lalu Lintas, Vol 4, No 1, 2023: 88-92.
M. Chandra Restu Maulana, Ketentuan Pembangunan Speed Bump Liar Pada Area Pemukiman Warga Ditijau dari Peraturan Menteri perhubungan Nomor 14 Tahun 2021 Tentang Alat Pengendali Dan Pengaman Pengguna Jalan, 2023.
Saidul bahri, Penempatan Alat Pembatas Kecepatan Kendaraan Bermotor Berdasarkan Perda Nomor 4 Tahun 2013 Tentang Lalu Lintas Di kota Padang.
Copyright (c) 2025 Nunung Ramadan Tanda, Yohanes Pattinasarany, Garciano Nirahua (Author)
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
Authors who publish their manuscripts in this Journal agree to the following conditions:
- The copyright in each article belongs to the author, as well as the right to patent.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.
- Authors have the right to self-archiving of the article (Author Self-Archiving Policy)
