PENERAPAN TEKNOLOGI PIROLISIS RECYFUEL UNTUK MENGOLAH SAMPAH PLASTIK LAUT MENJADI ENERGI ALTERNATIF DI DESA PALANG, TUBAN

  • Marita Ika Joesidawati Universitas PGRI Ronggolawe
  • Susanti Dhini Anggraini Universitas PGRI Ronggolawe
  • Suwarsih Suwarsih Universitas PGRI Ronggolawe
Keywords: Pyrolysis, Marine Plastic Waste, Alternative Energy, Community Empowerment

Abstract

Marine plastic waste in Palang Village, Tuban Regency, has caused serious environmental problems, such as water pollution, declining fish catches, and health disturbances due to microplastics. This community service initiative aims to address these issues through the implementation of RECYFUEL pyrolysis technology, which converts plastic waste into alternative energy (diesel) while empowering the Putera Bahari Youth Group. Implementation methods include socialization, technology application training, mentoring and evaluation, and program sustainability measures. The results show an increase in the partners' empowerment level in Management Aspects (100% of partners mastered waste management and financial reporting), Production Aspects (90% of partners were able to independently produce diesel), and Marketing Aspects (90% of partners were able to market diesel products to local fishermen). A total of 50% of plastic waste was successfully processed into diesel, with a conversion rate of 1 kg of plastic yielding 300–400 ml of diesel, along with the creation of a new profitable business opportunity. This program not only reduces environmental pollution but also enhances the economic income of the community. Thus, RECYFUEL technology proves to be an effective and sustainable solution for plastic waste management and the empowerment of coastal communities

Downloads

Download data is not yet available.

References

Aliviyanti, D., Kasitowati, R. D., Yona, D., Semedi, B., Rudianto, R., Asadi, M. A., Isdianto, A., & Dewi, C. S. U. (2022). Edukasi Bahaya Sampah Plastik pada Perairan dan Biota Laut di Sekolah Alam, Pantai Bajulmati, Kabupaten Malang, Jawa Timur. Abdi Geomedisains, 119–129.

Anggraini, S. D., & Trisanjaya, K. (2020). Produksi Biodiesel Dari Limbah Minyak Ikan Rucah Sebagai Alternatif Bahan Bakar Mesin Diesel. Prosiding SNasPPM, 5(1), 147–153.

Cahyono, M. S., Liestiono, M. R. P., & Widodo, C. (2019). Proses pirolisis sampah plastik dalam rotary drum reactor dengan variasi laju kenaikan suhu. Prosiding Seminar Nasional Teknoka, 3(2502), 63.

Hidayati, D., Fauziah, F., Aunurohim, A., Ashuri, N. M., Setiawan, E., Mulyadi, Y., Syahroni, N., Joesidawati, M. I., & Suwarsih, S. (n.d.) (2023). Microplastic Characteristic Found in Gastrointestinal Tract of Pelagic and Demersal Fishes in Tuban, East Java. Journal of Marine-Earth Science and Technology, 4(1), 9–15.

Joesidawati, M. I. (2018). Pencemaran Mikroplastik Di Sepanjang Pantai Kabupaten Tuban. Prosiding SNasPPM, 3(1 SE-Articles). http://prosiding.unirow.ac.id/index.php/SNasPPM/article/view/135

Joesidawati, M. I., Suwarsih, Nuruddin, A. W., & Sriwulan. (2024). Performance Test Smoked Tool Fish Which Effective, Hygienic, and Eco-Friendly. Revista de Gestão - RGSA, 18(6 SE-), e07478.

Khatimah, H., & Indra, M. A. (2024). Upaya Pelestarian Pantai Teluk Kabung Selatan Melalui Partisipasi Masyarakat Dalam Mengurangi Cemaran Sampah Plastik. Open Community Service Journal, 3(2), 77–82.

Liestiono, R. P., Cahyono, M. S., Widyawidura, W., Prasetya, A., & Syamsiro, M. (2017). Karakteristik Minyak dan Gas Hasil Proses Dekomposisi Termal Plastik Jenis Low Density Polyethylene (LDPE). Jurnal Offshore: Oil, Production Facilities and Renewable Energy, 1(2), 1–9.

Mokhtar, A., Jufri, M., & Supriyanto, H. (2018). Perancangan Pirolisis Untuk Membuat Bahan Bakar Cair Dari Limbah Plastik Kapasitas 10 KG. Seminar Nasional Teknologi Dan Rekayasa (SENTRA), 125–133.

Najmi, N., Rahma, E. A., Suriani, M., Hartati, R., Lubis, F., & Oktavinanda, G. (2022). Sosialisasi Bahaya Sampah Plastik Terhadap Ekosistem Laut Bagi Remaja Desa Ujong Pulau Rayeuk, Aceh Selatan. J-ABDI: Jurnal Pengabdian Kepada Masyarakat, 2(2), 3855–3862.

Nurholis, K., & Mokodompit, E. A. (2024). Laut Sebagai Sarana Mata Pencaharian dan Ancaman Akibat Pencemaran Ligkungan bagi Masyarakat Pesisir Konawe Utara. Almufi Jurnal Sosial Dan Humaniora, 1(3), 307–313.

Sari, M. N., Rudiyanto, R., Legowo, E., Widodo, P., & Suwarno, P. (2023). Penanganan Pencemaran Plastik Sebagai Sampah Laut (Marine Debris) Melalui Perspektif Keamanan Maritim. NUSANTARA: Jurnal Ilmu Pengetahuan Sosial, 10(4), 1664–1675.

Setiawan, R., Kalista, A., Sanjaya, K. T., & Anggraini, S. D. (2024). Perancangan Alat Pencacah Sampah Untuk Mengurangi Limbah Di Universitas Pgri Ronggolawe Tuban Menggunakan QFD. Prosiding New SNASPPM, 9(1), 1044–1052.

Suwarsih, S., Joesidawati, M. I., & Sriwulan, S. (2019). Pelatihan Pemilahan Sampah Plastik Sebagai Bahan Biji Plastik Di Desa Palang. Jurnal Pengabdian Kepada Masyarakat, 9(2), 162–167.

Published
2025-10-31
How to Cite
Joesidawati, M. I., Anggraini, S. D., & Suwarsih, S. (2025). PENERAPAN TEKNOLOGI PIROLISIS RECYFUEL UNTUK MENGOLAH SAMPAH PLASTIK LAUT MENJADI ENERGI ALTERNATIF DI DESA PALANG, TUBAN. PAKEM : Jurnal Pengabdian Kepada Masyarakat, 5(2), 172-181. https://doi.org/10.30598/pakem.5.2.172-181