MAXIMUM EXPONENTIALLY WEIGHTED MOVING AVERAGE WITH MEASUREMENT ERROR (USING COVARIATE METHOD) USING AUXILIARY INFORMATION FOR CEMENT QUALITY CONTROL

  • Eirene Christina Sellyra Statistics Department, Faculty of Science and Data Analytics, Institut Teknologi Sepuluh Nopember, Indonesia
  • Muhammad Ahsan Statistics Department, Faculty of Science and Data Analytics, Institut Teknologi Sepuluh Nopember, Indonesia https://orcid.org/0000-0003-3444-2766
  • Wibawati Wibawati Statistics Department, Faculty of Science and Data Analytics, Institut Teknologi Sepuluh Nopember, Indonesia https://orcid.org/0000-0002-9477-9718
DOI: https://doi.org/10.30598/barekengvol18iss2pp1333-1348
Keywords: Cement Production, Max-EWMAME (Covariate), AI, Quality Control

Abstract

The main quality characteristic at XYZ Inc. that should be observed is Compressive Strength. Cement production quality control is carried out on the average and process variability jointly with the Max-EWMA control chart. Measurement error can be found in the Compressive Strength. It can affect the sensitivity of the control chart, so quality control will be carried out by considering the presence of measurement error. Handling measurement errors can be done through three approaches (covariate method, multiple measurements, and linearly increasing variance). This research only focuses on the covariate method. Auxiliary variables also explain variance in the production process, so they are also considered in this research, with Blaine used as an auxiliary variable. Therefore, the control chart that will be formed is the Max-EWMA ME (Covariate) AI. The Max-EWMA and Max-EWMA ME (Covariate) AI control charts show that the XYZ Inc. cement production process based on variability and process averages is simultaneously statistically controlled. The controlled Max-EWMA control chart has an upper control limit of UCL=1.503018, and parameters  dan . Max-EWMA ME (Covariate) AI has in-control parameters . The Max-EWMA ME (Covariate) AI control chart is more sensitive than the Max-EWMA control chart. Cement production capabilities based on Compressive Strength have a Cpl and Cpk capability index of 1.54, which means that the cement production process is capable, consistent, and has high accuracy so that the quality has reached the target.

Downloads

Download data is not yet available.

References

D. C. Montgomery, Introduction to Statistical Quality Control, 7th ed. United States of Ameerica: John Wiley & Sons, Inc., 2013.

B. S. N. BSN, “SNI 0302-2014 semen portland pozolan oleh BSN.” p. 8, 2014.

M. Noor-ul-Amin, A. Javaid, M. Hanif, and E. Dogu, “Performance of maximum EWMA control chart in the presence of measurement error using auxiliary information,” Commun. Stat. Simul. Comput., vol. 51, no. 9, pp. 1–25, 2020, doi: 10.1080/03610918.2020.1772301.

A. Haq and M. B. C. Khoo, “A new synthetic control chart for monitoring process mean using auxiliary information,” J. Stat. Comput. Simul., vol. 86, no. 15, pp. 3068–3092, 2016, doi: 10.1080/00949655.2016.1150477.

N. Abbas, M. Riaz, and R. J. M. M. Does, “An EWMA-Type control chart for monitoring the process mean using auxiliary information,” Commun. Stat. - Theory Methods, vol. 43, no. 16, pp. 3485–3498, 2014, doi: 10.1080/03610926.2012.700368.

M. Six, “Quality in Multisource Statistics QUALITY GUIDELINES FOR,” no. 07112, pp. 1–93, 2019.

D. Kuhinek, I. Zorić, and P. Hrženjak, “Measurement uncertainty in testing of uniaxial compressive strength and deformability of rock samples,” Meas. Sci. Rev., vol. 11, no. 4, pp. 112–117, 2011, doi: 10.2478/v10048-011-0021-2.

J. M. Lucas and M. S. Saccucci, “Exponentially weighted moving average control schemes: Properties and enhancements,” Technometrics, vol. 32, no. 1, pp. 1–12, 1990, doi: 10.1080/00401706.1990.10484583.

H. Xie, “Contributions to Qualimetry,” Univeristy of Manitoba, 1999.

G. C. Runger and D. C. Montgomery, “Gauge capability and designed experiments. part 1 basic methods,” Qual. Eng., vol. 6, no. 1, pp. 115–135, 1993, doi: 10.1080/08982119308918710.

K. W. Linna and W. H. Woodall, “Effect of measurement error on shewhart control charts,” J. Qual. Technol., vol. 33, no. 2, pp. 213–222, 2001, doi: 10.1080/00224065.2001.11980068.

P. E. Maravelakis, J. Panaretos, and S. Psarakis, “EWMA chart and measurement error,” J. Appl. Stat., vol. 31, no. 4, pp. 445–455, 2004, doi: 10.1080/02664760410001681738.

W. J. Braun and D. Park, “Estimation of σ for Individuals Charts,” J. Qual. Technol., vol. 40, no. 3, pp. 332–344, 2008, doi: 10.1080/00224065.2008.11917738.

Prof.Dr.Sugiyono, Metode Penelitan Kuantitatif Kualitatif dan R&D. ALFABETA,CV., 2013.

L. Kemdikbud, “Pertemuan 12 analisis korelasi product momen pearson,” Anal. Korelasi Prod. Moment Pearson, p. 12, 2020, [Online]. Available: https://lmsspada.kemdikbud.go.id/pluginfile.php/559913/mod_folder/content/0/PERTEMUAN 12 ANALISIS KORELASI PRODUCT MOMEN PEARSON.pdf.

W. W. Daniel, Applied Nonparametric statistics, 2nd ed. Boston Massachusetts: PWS-KENT Publishing Company, 1990.

A. C. Rencher and G. B. Schaalje, Linear Models in Statistics, 2nd editio., vol. 96, no. 455. United States of America: John Wiley & Sons, Inc., 2008.

G. Chen, S. W. Cheng, and H. Xie, “Monitoring process mean and variability with one EWMA chart,” J. Qual. Technol., vol. 33, no. 2, pp. 223–233, 2001, doi: 10.1080/00224065.2001.11980069.

A. Javaid, M. Noor-ul-Amin, and M. Hanif, “Performance of Max-EWMA control chart for joint monitoring of mean and variance with measurement error,” Commun. Stat. Simul. Comput., vol. 52, no. 1, pp. 1–26, 2023, doi: 10.1080/03610918.2020.1842886.

C. P. Quesenberry, “On properties of Q charts for variables,” J. Qual. Technol., vol. 27, no. 3, pp. 184–203, 1995, doi: 10.1080/00224065.1995.11979592.

A. Haq and S. Akhtar, “Auxiliary information based maximum EWMA and DEWMA charts with variable sampling intervals for process mean and variance,” Commun. Stat. - Theory Methods, vol. 51, no. 12, pp. 3985–4005, 2022, doi: 10.1080/03610926.2020.1805766.

D. C. Montgomery, Introduction to Statistical Quality Control, 8th ed. John Wiley & Sons, Inc., 2020.

A. Rochmaturiza and D. F. Aksioma, “PENGENDALIAN KUALITAS PRODUK PORTLAND POZZOLAND CEMENT ( PPC ) DENGAN PENDEKATAN REGRESSION ADJUSTMENT CONTROL CHART DI PT . SEMEN INDONESIA ( Persero ), Tbk . Unit Gresik,” Institut Teknologi Sepuluh Nopember, 2018.

I. P. Laintarawan, I. nyoman S. Widnyana, and I. W. Artana, “Buku Ajar Konstruksi Beton I,” Universitas Hindu Indonesia, 2009.

S. W. I. Pratama, N. Rauf, and E. Juarlin, “Pembuatan dan Pengujian Kualitas Semen Portland Yang Diperkaya Silikat Abu Ampas Tebu ( Fabrication and Quality Test of Cement Portland With Enriched by Silicate Sugarcane Bagasse Ash ),” J. Fis. FMIPA Unhas, pp. 1–5, 2014.

Published
2024-05-25
How to Cite
[1]
E. Sellyra, M. Ahsan, and W. Wibawati, “MAXIMUM EXPONENTIALLY WEIGHTED MOVING AVERAGE WITH MEASUREMENT ERROR (USING COVARIATE METHOD) USING AUXILIARY INFORMATION FOR CEMENT QUALITY CONTROL”, BAREKENG: J. Math. & App., vol. 18, no. 2, pp. 1333-1348, May 2024.
Issue
Vol 18 No 2 (2024): BAREKENG: Journal of Mathematics and Its Application
Section
Articles

Copyright (c) 2024 Eirene Christina Sellyra, Muhammad Ahsan, Wibawati Wibawati

Creative Commons License

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Authors who publish with this Journal agree to the following terms:

  1. Author retain copyright and grant the journal right of first publication with the work simultaneously licensed under a creative commons attribution license that allow others to share the work within an acknowledgement of the work’s authorship and initial publication of this journal.
  2. Authors are able to enter into separate, additional contractual arrangement for the non-exclusive distribution of the journal’s published version of the work (e.g. acknowledgement of its initial publication in this journal).
  3. Authors are permitted and encouraged to post their work online (e.g. in institutional repositories or on their websites) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published works.