DESAIN ALAT UKUR SUHU DAN KELEMBABAN BERBASIS MIKROKONTROLER ATMEGA 16

  • Ronaldo Talapessy Jurusan Matematika FMIPA Universitas Pattimura
DOI: https://doi.org/10.30598/barekengvol6iss2pp29-31
Keywords: Temperature, Humidity, ATMega16 Microcontroller

Abstract

The has already designed temperature and humidity measurement devices using SHT11 sensor with display results in Liquid Crystal Display (LCD). Manually, the environment
temperature was measured using a mercury thermometer and the environment humidity was measured by a hygrometer. The results were observed in analog and it often misread thus it caused errors in ready the data. To solve the problem, then were made a design temperature and humidity measuring devices digitally. The processor of this tool is ATMega16
microcontroller that processes analog input signals to obtain a digital output. Temperature and humidity sensors SHT11 were used, the measurement results and read digital display
on the LCD. This design produced temperature and humidity measurement, aids accurately, it was ± 0.4 ° C and ± 3%.

Downloads

Download data is not yet available.

References

Arifianto, D., Chandra, F., 2011, Jago Elektronika Rangkaian Sistem Otomatis, Kawan Pustaka, Jakarta.
Costa, E., Freire, R., Silva, J., Cursino, C., da Silva, J., Barros, A., 2009, Systems Of Measurement and Control Of Relative Humidity In Newborn Incubator, International Workshop on Medical
Measurements and Applications Cetraro, Italy.
Nurlandi F. 2010. Desain Inkubator Bayi Dengan Kontrol Otomatis Yang Ekonomis Untuk Klinik Persalinan (Ecobator). [Skripsi]. Surabaya. ITS.
Riza F. F, Setiawan I, Sumardi. 2011. Perancangan Sistem Pengendali Suhu Dan Memonitoring Kelembaban Berbasis ATMega8535 Pada Plant Inkubator. [Skripsi]. Semarang. Universitas
Diponegoro.
Sensirion. 2010. Datasheet SHT11 Humidity and Temperature Sensor. www.sensirion.com. Diakses 4 November 2012.
Wardhana L. 2006. Belajar Sendiri Mikrokontroler AVR Seri ATMega8535 Simulasi, Hardware dan Aplikasi. Andi. Yogyakarta.
Published
2012-12-01
How to Cite
[1]
R. Talapessy, “DESAIN ALAT UKUR SUHU DAN KELEMBABAN BERBASIS MIKROKONTROLER ATMEGA 16”, BAREKENG: J. Math. & App., vol. 6, no. 2, pp. 29-31, Dec. 2012.
Issue
Vol 6 No 2 (2012): BAREKENG : Jurnal Ilmu Matematika dan Terapan
Section
Articles

Authors who publish with this Journal agree to the following terms:

  1. Author retain copyright and grant the journal right of first publication with the work simultaneously licensed under a creative commons attribution license that allow others to share the work within an acknowledgement of the work’s authorship and initial publication of this journal.
  2. Authors are able to enter into separate, additional contractual arrangement for the non-exclusive distribution of the journal’s published version of the work (e.g. acknowledgement of its initial publication in this journal).
  3. Authors are permitted and encouraged to post their work online (e.g. in institutional repositories or on their websites) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published works.